SR is the latest Delta-based 3D printer independently developed by FLSUN.
Fast printing speed is its biggest advantage. Its default printing speed is 150mm/s (about 3-4 times that of i3 architecture), and even if it runs at 200mm/s, its quality performance is good. Compared with other ordinary 3D printers, printing the same model can save about half of the printing time! SR uses a 32-bit high-speed motherboard with four TMC 2209 installed on the motherboard. It is quieter, more stable, and has higher printing accuracy.
Technical Specifications:
- Product Name; SuperRacer
- Print Speed: 150mm/s-200mm/s
- Molding Tech: FDM
- Power: 300W
- Nozzle Temp: <260℃
- Slicer Software: Cura/Repetrier/Etc.
- Nozzle Diameter: 0.4mm
- Filament Detection: Yes
- Bed Temp: <100°
- Filament Diameter: 1.75mm
- Printing Accuracy: 0.05-0.4mm
- Resume Printing: Yes
- Input Voltage: 115-230V
- Print Size: 260*260*330mm
- Filament Support: PLA/ABS/PETG
- Type Leveling: Auto-leveling
- Working Model: SD Card/USB
- Mouth Type: Single Nozzle
- Firmware: Open source Marlin
- Output Voltage: 24V
- Machine Size: 440"390*960mm